TA4FX -Tini QG 4-pin connector

Electrical:

• Contact Resistance: .010 ohms maximum after life (and after salt spray).
• Current Rating (Carry Only): 5 A, 125 V AC (4 A, 125 V AC on 5 circuit) based on 30°C maximum.
• Insulation Resistance: 510,000 megohms minimum @ 500 VDC (initial); 10,000 megohms minimum (after humidity test).
• Dielectric Strength: 1,000 V (rms).  

Mechanical:

• Life: 5,000 operations minimum
• Insertion/Withdrawal Forces (after life): 6.1 lb./2.77 kg after life, insertion; 5.6 lb/2.54 kg, withdrawal.
• Solderability Standard: Meets EIA RS-186-9E.
• Mechanical Shock: Meets MIL-STD-202, method 213B.
• Vibration: Meets MIL-STD-202, method 201A.
• Wire Size: #22 wire gauge solid; #24 wire gauge stranded.

Environmental:

• Thermal Range: -55°C to + 85°C.
• Humidity: Meets MIL-STD-202, method 106D.
• Thermal Shock: Meets MIL-STD-202, method 107D.
• Salt Spray: Meets MlL-STD-202, method 101.

Material:

• Housing, Plugs and Male Receptacles: Copper alloy, nickel-plated. Female Receptacle–Die-cast zinc, nickel-plated.
• Black Tini Q-G® Housing: Copper alloy, black chrome-plated.
• Pin and Socket Contacts: Copper alloy, silver-plated.
• Flex Relief: Molded black thermoplastic elastomer.
• Latch Button: Molded black thermoplastic.
• Release Lever and Mounting Washer: Steel, nickel-plated.
• Standoff/Ground Terminal and Cable Clamp: Steel, electrotinned.
• Inserts and Insulating Spacer: Molded, high strength thermoplastic
• Latch (Female): Copper alloy, nickel-plated.
• Mounting Nut: Copper alloy, nickel-plated.